ITO (Inidum Tin Oxide) and FTO (fluorine doped tin oxide) Coated PET Plastic Film

ITO (Indium Tin Oxide) and FTO coated PET plastic film provided from Nanocs were made by coating ITO or FTO to one side of PET film. These ITO coated plastic film comes with different surface resistivity from 30 ohm/sq to 100 ohm/sq, with thickness around 0.17 mm. ITO coated PET film has been used in LCD/OLED devices and many other devices requiring high electrical conductivity and good optical transmission. Our ITO coated PET has excellent surface roughness around +-5 nm. Thickness of our ITO coating ranges from 50 nm to 700 nm depends on their surface resistivity. Optical transmission of these ITO coated plastic film is over 85% in the visible range.

Nanocs 提供的 ITO（氧化銦錫）和 FTO 涂層 PET 塑料薄膜是通過在 PET 薄膜的一側涂布 ITO 或 FTO 制成的。這些 ITO 涂層塑料薄膜具有不同的表面電阻率，從 30 歐姆/平方到 100 歐姆/平方，厚度約為 0.17 毫米。ITO 涂層 PET 薄膜已用于 LCD/OLED 器件和許多其他需要高導電性和良好透光率的設備。我們的 ITO 涂層 PET 在 +-5 nm 左右具有出色的表面粗糙度。我們的 ITO 涂層的厚度范圍為 50 nm 至 700 nm，具體取決于其表面電阻率。這些 ITO 涂層塑料薄膜的光學透射率在可見光范圍內超過 85%。

Nanocs ITO Coated PET Film Specifications:

• Surface resistivity: 5~100 ohm/sq, see individual product label;

• PET plastic thickness: 0.17~0.22 mm;

• ITO thickness: 30~600 nm depends on ITO surface resistivity:

• Optical transmission: 83% to 90%;

• ITO PET size: 1 cm to 10 cm, customer size available upon request.

• 表面電阻率：5~100 ohm/sq，見個別產品標簽;

• PET塑料厚度：0.17~0.22 mm;

• ITO 厚度：30~600 nm 取決于 ITO 表面電阻率：

• 光傳輸率：83% 至 90%;

• ITO PET 尺寸：1 厘米至 10 厘米，可根據要求提供客戶尺寸。

相關產品

上海牧榮生物科技有限公司